Otimização das condições de extração de senosídeos por soluções hidroetanólicas das folhas de Senna alexandrina MILL empregando planejamento fatorial / Optimization of conditions for hydroethanolic extractionof sennosides From Senna alexandrina MILL leaves employing factorial design

Senna alexandrina MILL é um arbusto alto, originário da Arábia, amplamente cultivado na Índia e largamente utilizado como laxativo na constipação aguda e em casos em que a defecação é aconselhável, como após intervenção cirúrgica antes ou depois de operação abdominal, sendo empregado na forma de pós, xaropes, comprimidos e cápsulas. Como estas formulações geralmente são preparadas à partir de derivados do extrato líquido, torna-se fundamental para a qualidade e eficácia que este tenha seu processo de extração otimizado. O presente trabalho teve por objetivo determinar as melhores condições de extração, por soluções hidroetanólicas, das folhas de Senna alexandrina, empregando planejamento fatorial completo com ponto central 23 (três fatores e dois níveis) onde os níveis dos fatores foram codificados como -1 (baixo), 0 (ponto central) e 1 (alto), e metodologia de superfícies de respostas, para avaliar a influência do solvente, da quantidade de planta e do método de extração sobre o teor de derivados hidroxiantracênicos expressos em senosídeo B (SB) e sobre o resíduo seco (RS) nos extratos líquidos preparados. Foram realizados planejamentos experimentais completos, sendo um realizado pelo deslocamento dos níveis, após a análise do primeiro planejamento. Após a análise da superfície de resposta do planejamento com os níveis deslocados encontrou-se a faixa de melhor extração dos derivados hidroxiantracênicos expressos em senosídeo B com a melhor relação SB/RS, utilizando o solvente etanol/água a 60% V/V, 15 gramas da planta, e extração com aquecimento e agitação.

Senna alexandrina Mill is an erect shrub, native toArabia but widely cultivated in India, that is widely employed as a purgative for acute constipation and when defecation is advisable, such as before or after abdominal surgery. It is used in the form of powder, syrup, tablets and capsules. As these formulations are typically prepared from derivatives of the liquid extract, it is crucial for both quality and efficiency that the extraction process is optimized. The aim of this study was to establish optimal conditions for hydroethanolic extraction of Senna alexandrina leaves, by employing a 23 full factorial experimental design with a central point (three factors and two levels), where the factor levels were coded as -1 (low), 0 (central point) and 1 (high), and response surface methodology, to assess the influence of the solvent, the amount of plant and the extraction method on the yield of hydroxyanthracene derivatives, expressed as sennoside B (SB), and on the dry matter (DM) in the prepared liquid extracts. Full factorial runs were conducted, one being carried out with the levels adjusted following the analysis of the first design. Upon the assessment of the response surface with adjusted levels, the optimum range for extraction of hydroxyanthracene derivatives, expressed as SB, was determined. The best SB/DM ratio was achieved byusing 60% (v/v) ethanol/water solvent, 15 g of the plantand extraction with heating and stirring.

Hypoglycaemic activity and molecular mechanisms of Caesalpinia ferrea Martius bark extract on streptozotocin-induced diabetes in Wistar rats.

ETHNOPHARMACOLOGICAL RELEVANCE: The tea from the stem bark of Caesalpinia ferrea Martius (Leguminosae) has been popularly used in the treatment of diabetes in Brazil. AIM OF THE STUDY: To investigate the hypoglycaemic properties and to elucidate the mechanisms by which the aqueous extract of the stem bark of Caesalpinia ferrea reduces blood glucose levels in streptozotocin-induced diabetic rats via the enzymatic pathways of protein kinase B (PKB/Akt), AMP-activated protein kinase (AMPK) and acetyl-CoA carboxylase (ACC). MATERIALS AND METHODS: The aqueous extract of the stem bark of Caesalpinia ferrea (300 and 450 mg/kg/day), vehicle and metformin (500 mg/kg/day) were administered orally to STZ-diabetic rats (n = 7/group) for 4 weeks. Changes in body weight, food and water intake, fasting glucose levels and oral glucose tolerance were evaluated. Phosphorylation (P) and the expression of Akt, AMPK and ACC in the liver and skeletal muscle were determined using Western blot. RESULTS: The aqueous extract of the stem bark of Caesalpinia ferrea reduced blood glucose levels and improved the metabolic state of the animals. P-Akt was increased in the liver and skeletal muscle of the treated animals, P-AMPK was reduced only in the skeletal muscle of these animals and P-ACC was reduced in both when compared with untreated rats. CONCLUSION: The results indicate that the aqueous extract of the stem bark of Caesalpinia ferrea has hypoglycaemic properties and possibly acts to regulate glucose uptake in liver and muscles by way of Akt activation, restoring the intracellular energy balance confirmed by inhibition of AMPK activation.

Controle estatístico de processo aplicado ao monitoramento de envase da tintura de iodo / Statistical process control applied to used in monitoring the iodine tincture fill phase

A aplicação do controle estatístico para monitorar o desempenho da etapa de envase de formas farmacêuticas líquidas consiste em obter informações e estabelecer estratégias para a validação do processo, assim como possibilitar o gerenciamento deste a partir da percepção do comportamento das variáveis críticas do produto durante a produção. Esta etapa do processo possui como variável crítica o volume de envase. Variações neste parâmetro fora dos limites de qualidade pré-estabelecidos pela legislação refletem ineficiências durante o processo podendo ocasionar a reprovação do produto. Para demonstrar de forma objetiva o grau de segurança requerida para este tipo de processo foram utilizadas ferramentas do controle estatístico de processo (CEP) para estudar e validar o desempenho da etapa de envase da tintura de iodo fabricada pela indústria farmacêutica Lapon Química e Natural Ltda. (Limoeiro - PE, Brasil), bem como verificar a estabilidade estatística e capacidade do processo. As atividades de melhoria, através da identificação e eliminação das causas especiais de variação do processo, permitiram a redução de sua variabilidade, assegurando uma melhoria contínua da qualidade nos resultados da produção.

Statistical control is used to monitor the performance of the fill phase in the manufacture of liquid pharmaceutical forms, to obtain information and establish criteria for process validation, as well as to enable control of the process, by observing the behavior of the critical variables during production. The critical variable at this stage of the process is the filling volume. Variations in this parameter outside the established legal quality limits reflect inefficiency in the process that may result in product rejection. To demonstrate objectively the degree of security required in this type of process, statistical process control (SPC) tools were used to study and validate the performance of the fill phase in production of iodine tincture by the Pharmaceutical manufacturer Lapon Química e Natural Ltda. (Limoeiro - PE, Brazil), as well as to check the statistical stability and capacity of the process. Optimization of the process, by identifying and removing the specific causes of variation, led to a reduction in its variability, ensuring a continual improvement in the quality of production.

Genetic control of the resistance of common beans to white mold using the reaction to oxalic acid.

The use of genetically resistant cultivars is the best method to reduce losses caused by white mold (Sclerotinia sclerotiorum (Lib.) de Bary). As the best known resistance sources are not adapted, the genetic control of white mold in the common bean must be understood to guide breeding more efficiently. The objective of the present study was to identify the genetic control of the resistance of common bean to white mold by an indirect method using oxalic acid. For this, the descendents of the VC3 cross (susceptible) x G122 (resistant) were used. The trait was assessed by a descriptive key of scores after treatment with oxalic acid. The assessments were made on individual plants (P1, P2, F1, F2 populations and within F2:3 families) in a complete randomized design and on family means where the randomized block design was used with two replications. The oxalic acid method was efficient in detecting genetic differences. The additive effects dominated and genetic control was characterized by partial dominance (d/a = 0.47). At least one resistance gene is involved, although the trait is greatly influenced by the environment. The broad sense heritability at the family mean level (0.47) was greater than that obtained at the individual plant level (0.33), indicating that selection should be more efficient based on progeny mean assessments.

Compression behavior of formulations from Phyllanthus niruri spray dried extract.

The aim of this study was to evaluate the compression behavior of Phyllanthus niruri spray dried extract as well as the influence of excipients on the properties of tablets containing a high dose (70% by weight) of this product. The effect of excipients was studied by a 22 factorial design. The factors investigated were the type of disintegrant (croscarmellose sodium and sodium starch glycolate) and the type of filler/binder (microcrystalline cellulose and dibasic dicalcium phosphate). The tablets were produced on a single punch tablet press using a constant compression force of 5000 N. The tablets formulated with microcrystalline cellulose presented a plastic behavior while the tablets containing dibasic dicalcium phosphate disclosed a fragmentary behavior. The disintegration time was significantly influenced by both factors, however, the tensile strength was only affected by the filler/binder. Additional experiments considering the influence of the compression force (2500 N and 5000 N) and the proportion of croscarmellose sodium (1.5%, 3.0% and 6.0%) on the mechanical properties of the tablets were performed by a 2 x 3 factorial design. Both factors significantly affected the tensile strength, friability and disintegration time of the tablets.

pH at the micellar interface: synthesis of pH probes derived from salicylic acid, acid-base dissociation in sodium dodecyl sulfate micelles, and Poisson-Boltzmann simulation.

The study of the H+ concentration at the micellar interface is a convenient system for modeling the distribution of H+ at interfaces. We have synthesized salicylic acid derivatives to analyze the proton dissociation of both the carboxylic and phenol groups of the probes, determining spectrophotometrically the apparent pK(a)'s (pK(ap)) in sodium dodecyl sulfate, SDS, micelles with and without added salt. The synthesized probes were 2-hydroxy-5-(2-trimethylammoniumacetyl)benzoate; 2-hydroxy-5-(2-dimethylhexadecylammoniumacetyl)benzoate; 2-hydroxy-5-(2-dimethylhexadecylammoniumhexanoyl)benzoate; 2-hydroxy-5-(2-dimethylhexadecylammoniumundecanoyl)benzoate; 2-hydroxy-5-acetylbenzoic acid; and 2-hydroxy-5-dodecanoylbenzoic acid. Upon incorporation into SDS micelles the pK(ap)'s of both carboxylic and phenol groups increased by ca. 3 pH units and NaCl addition caused a decrease in the probe-incorporated pK(ap). The experimental results were fitted with a cell model Poisson-Boltzmann (P-B) equation taking in consideration the effect of salt on the aggregation number of SDS and using the distance of the dissociating group as a parameter. The conformations of the probes were analyzed theoretically using two dielectric constants, e.g., 2 and 78. Both the P-B analysis and conformation calculations can be interpreted by assuming that the acid groups dissociate very close to, or at, the interface. Our results are consistent with the assumption that the intrinsic pK(a)'s of both carboxylic and phenol groups of the salicylic acid probes used here can be taken as those in water. Using this assumption the micellar and salt effects on the pK(ap)'s of the (trialkylammonium)benzoate probes were described accurately using a cell model P-B analysis.

Validation of a LC method for the analysis of phenolic compounds from aqueous extract of Phyllanthus niruri aerial parts.

A reversed-phase high-performance liquid chromatographic separation and quantitative method using a phosphoric acid-acetonitrile gradient was developed to analyze phenolic compounds present in aqueous extract from the aerial parts of Phyllanthus niruri. The chromatographic method was validated for linearity, precision and accuracy for both reference substance (gallic acid) and for three well resolved peaks from P. niruri aqueous extract. Both calibration curves were linear with correlation coefficients higher than 0.999. The reproducibility for the three peaks ranged from 2.3% to 4.6% and the accuracy for gallic acid in the aqueous extract was 103%. The method allowed the complete resolution of three peaks, one of them was identified by diode array detection as gallic acid. The analysis of the botanic morphological elements of the aerial parts from P. niruri showed that the leaves have a higher amount of phenolic compounds than the branches.

Influence of adjuvants on the dissolution profile of tablets containing high doses of spray-dried extract of Maytenus ilicifolia.

A 2(3) factorial design was used in order to evaluate the influence of some adjuvants on the dissolution profile of tablets containing high doses of Maytenus ilicifolia spray-dried extract. Tablets were prepared on a single punch tablet press using 15 mm flat punches by individual direct compression of 650 mg from each formulation containing 375 mg of the spray-dried extract. The factors investigated were disintegrant (croscarmellose sodium or sodium starch glycolate), lubricant (colloidal silicon dioxide or magnesium stearate) and filler/binder (microcrystalline cellulose or lactose). The dissolution profiles were analyzed to determine the dissolution kinetics, the dissolution half-lives (t50%), the similarity factor (f2) and the dissolution efficiency (DE %), which was selected as the response criteria to evaluate the factorial design. The results revealed that in spite of the high content of spray-dried powder in the tablets, the dissolution profiles of the extract did depend on the adjuvant used. The filler/binder had the most important effect on the dissolution efficiency of the tablets.